SPECIFICATIONS

Brand Name: Beemyi

Choice: yes

Commodity Quality Certification: ce

High-concerned chemical: None

Is Batteries Included: No

Medical supervision required?: N

Origin: Mainland China

Power Source: Electric,Electric

Voltage: Below-75V DC (Safety Extra-Low Voltage DC, SELV DC)

Function and Performance

When applied to skin tissue, the collagen fibers in the dermis can be heated to 45°C to 65°C.

This causes collagen fibers to contract, thereby promoting collagen regeneration. This achieves the effects of eliminating fine lines, lightening pigmentation, and restoring skin elasticity.

Usage Instructions

1. Place the device on a flat surface, ensuring unobstructed airflow through the bottom ventilation holes.

2. Ensure the handle cable plug is fully inserted into the handle.

3. Plug the power cord into the adapter port.

4. A steady indicator light indicates standby mode; a flashing light indicates operation.

5. Apply a 2-3mm thick layer of gel to the treatment area by pumping approximately twice.

6. After setting the energy level, begin operation as shown in the diagram above. The gel will gradually dry during operation.

7. Slowly move the handle over the area indicated in the diagram, or hold it stationary for 2-3 seconds.

8. After completing the gel application area, treat other areas using the same method.

9. After the procedure, remove any gel residue from the treatment area and wipe the handle and electrodes with a cloth to remove residual gel.

10. Applying an ampoule or cream post-treatment promotes skin repair. If going outdoors, apply sunscreen immediately.

FUNCTION AND PERFORMANCEFor skin tissue , When acting on the skin，the collagen fibers in the dermis layer can be heatedto 45℃ to 65℃，which will cause the contract of collagen fibers, leading to the proliferation ofcollagen so as to remove wrinkles，reduce pigmentation and restore skin elasticity.How to Use1.Place this device on flat floor for easy airflow through air flow through air hole on the floor surface.2. Plug of hand piece cable should be fully insert to hand piece.3. Insert power cable into adapter terminal.4.when the indicator is on,it means the machine is standby.When the indicator is flashing,it means the machine is working.5.Apply 2-3 mm thickness of gels on area to be treated by around 2 times pumping.6.After finishing energylevel setting,start to operate referring to above picture. Whengel is dried during operate it.7. Move hand piece slowly to the area as shown in above picture or please don'tmove and stay the area to be treated during 2-3 seconds.8. After finishing operation on gel applied area, proceed to operate other areas as foregoing methods.9. Removegels on treated area afteroperation and also remove gels remanent hand piece and electrode with cloth or napkin.10.Applying ampoule or cream on skin after operation could help skin improvement more.It is recommended to apply UV block lotion on skin right after operation if you want to go out.